TL;DR: The best shower head depends on your water pressure and how you like to shower: a fixed overhead drencher, often called a rainfall head, for a soaking shower; a handheld shower for rinsing hair and cleaning; or both, run from a two-outlet valve.
- A 200mm head suits most showers; 250 to 300mm suits a walk-in; 400mm square is a true ceiling drench.
- Large drenchers need good flow. On a low-pressure gravity system, choose a smaller head or a pumped shower.
- Fixed heads start at £36 for our stainless steel drenchers; brass heads in five finishes start at £86.
- A wall arm is simplest to fit; a ceiling arm drops the water straight down but needs the pipework above.
- Match the head to your valve and taps, and wipe the nozzles regularly to stop limescale building up.
A good shower head makes more difference to your shower than almost anything else, but the biggest head is not always the best one. The right choice depends on the water pressure your home has, the size of your shower and whether you want a fixed overhead shower, a handheld one or both.
Here is how to choose, using the shower heads we sell from our Birmingham showroom.
Types of shower head
Fixed overhead, rainfall or drencher heads
A fixed head on a wall or ceiling arm, usually 200 to 400mm across, that showers you from above. Drencher and rainfall mean the same thing: a wide, soft spray that soaks you evenly. Our stainless steel drencher heads start at £36, the brass Bespoke round and square 250mm heads start at £86 in five finishes, and JTP's HIX shower head starts at £145.
Handheld showers and slide rails
A handset on a hose, held in a wall bracket or on a slide rail so you can set the height. It is the easiest way to rinse hair, wash children and clean the shower. Many people pair it with a fixed head. TED's round 3-mode hand shower starts at £59.
Multi-function and statement heads
Some heads offer more than one spray, or add a waterfall. The TED VENN fixed head with blade waterfall (from £599) pours a sheet of water as well as a rainfall spray.
Traditional shower heads
For a period bathroom, a traditional rose-style head suits crosshead valves and exposed pipework. Choose from the Imperial Lichfield 200mm shower head (from £145), JTP's Grosvenor Cross head in 125, 150 or 200mm (from £120), and TED's easy-clean WYSE traditional head (from £269).
What size shower head do you need?
| Head size | Best for | Examples |
|---|---|---|
| 125 to 150mm | Traditional showers, low pressure | Grosvenor Cross, Dart |
| 200mm | Most shower enclosures and over-bath showers | Lichfield, stainless drenchers |
| 250mm | Larger enclosures and walk-in showers | Bespoke, TED round brass |
| 300mm | Walk-ins and wet rooms with good flow | Stainless drenchers, TED VENN |
| 400 x 400mm | A big ceiling drench in a large shower | JTP Glide ultra-thin square |
Keep the head in proportion with the shower. A 300mm head in a 760mm enclosure will spray the glass rather than you, while a 200mm head can feel lost in a large walk-in.
Shower heads and water pressure
This is the question to answer before you choose. The wider the head, the more water it needs to give a good spray.
- Combi boiler or unvented cylinder: mains pressure suits most heads, including large drenchers, as long as the flow is good.
- Gravity-fed system with a cold tank in the loft: pressure is usually low. A smaller head works better, or add a shower pump or a pump-compatible digital shower.
- Check the valve too. Some thermostatic showers work from as little as 0.3 bar, but a big drencher will feel weak at that pressure.
If you are not sure what system you have, tell us your boiler type at your consultation and we will match the head to it. Our guide to digital vs thermostatic showers explains the valve options, and electric vs digital showers covers homes without much hot water.
Wall arm or ceiling arm?
- A wall arm comes out from the back wall and angles the head down. It is the easiest to fit because the pipe comes through the same wall as the valve. TED's 350mm wall arm starts at £59.
- A ceiling arm drops the head straight down for a true rainfall feel. It needs the pipework run above the ceiling, so it is best planned in a new bathroom. See TED's 150mm ceiling arm and our Bespoke round shower arm, which comes as a wall or ceiling arm.
Aim for the head to sit comfortably above the tallest person who uses the shower.
Matching the head to your valve
A fixed head and a handset together need a valve with two outlets and a diverter, so you can switch between them. Our Bespoke thermostatic valves run one, two or three outlets, and complete Bespoke shower sets come with the head, arm and handset in a matching finish. For a quick upgrade, a bar valve shower such as the Noxa matt black set (from £270) includes an overhead drencher and sliding handset. See our concealed thermostatic shower valves guide for more.
Finishes
Shower heads come in the same finishes as taps, so match the head, arm, valve and handset:
- Chrome: the brightest, and the easiest to match.
- Matt black: see our black shower ideas.
- Brushed brass, brushed bronze and gunmetal: warmer and softer, and better at hiding water marks. See our brushed brass bathroom ideas.
Keeping a shower head clean
Limescale builds up in the nozzles over time and makes the spray uneven. Many heads have soft rubber nozzles that you can rub with your thumb to clear; TED's WYSE head is designed to be easy to clean. Wipe the head with a soft cloth and mild soapy water, and avoid descalers or abrasive cleaners on coloured finishes. Birmingham's water is relatively soft, which helps, but a regular wipe keeps the spray even.
Prices include VAT and were correct at the time of writing. Check the product page for the current price.