Wall Mounted Basin Taps: Spout Reach, Height and Planning

Wall mounted basin mixer in matt black above a round countertop basin on a wooden vanity

TL;DR: A wall mounted basin tap comes out of the wall above the basin, so it suits countertop basins with no tap hole and keeps the worktop clear. The key is the spout reach: the water should land near the waste, not on the back of the bowl.

  • Single lever wall mounted mixers have one handle on a plate; 3 hole mixers have two handles and a separate spout.
  • Spout reach on our JTP wall mounted mixers runs from 145mm to 250mm.
  • Measure from the wall to the centre of the basin waste to choose the reach.
  • The concealed body goes in the wall before tiling, so plan it early.
  • Our wall mounted basin mixers start at £149.

A wall mounted basin tap is fixed to the wall above the basin, with the pipes hidden inside the wall. It is the natural choice for a countertop or sit-on basin without a tap hole, and it keeps the vanity top clear and easy to wipe down.

We have recently added wall mounted basin mixers from JTP to our wall mounted basin taps collection. This guide explains how to choose one that fits your basin.

Types of wall mounted basin tap

Type What you see Example Price
Single lever mixer One lever and spout on a single plate JTP HIX £340 to £350
Slim spout mixer A small lever plate and a separate slim spout JTP VOS slim spout £280 to £365
3 hole mixer Two handles and a spout JTP Grosvenor Cross £340 to £410
Digital spout A spout with a separate digital control TED 200mm basin spout £139 to £169 (spout)

The HIX mixer comes with both of its wall plates in the box. The TED spout pairs with the TED TOGO single outlet control, which lets you set an exact water temperature at the basin.

How much spout reach do you need?

Spout reach, or projection, is the distance from the wall to the end of the spout. Too short and the water hits the back of the bowl; too long and it splashes the front. As a guide:

  1. Measure from the finished wall (including tiles) to the centre of the basin waste.
  2. Choose a spout that reaches to the waste or slightly short of it, so the water lands near the plughole.
  3. For a gap between the wall and a countertop basin, add that gap to your measurement.
Tap Spout reach Min. pressure Price
JTP Grosvenor Pinch 3 hole 145mm 0.2 bar £410
JTP VOS slim spout 150, 200 or 250mm 0.5 bar £280 to £365
JTP INOX slim spout 150, 200 or 250mm 0.5 bar £365
JTP FORM 162.5mm See product page £220
JTP Amore 180mm 1 bar £305
JTP HIX 181mm 0.5 bar £340 to £350
JTP KIO 192.7mm 0.5 bar £220
JTP INOX 3 hole 194mm 0.5 bar £360
JTP Solex 3 hole 220 to 245mm 0.5 bar £290 to £385

The VOS and INOX slim spout mixers are useful when you are not sure of the final layout, because you can choose from three spout lengths.

How high above the basin?

The spout should be high enough to get your hands under comfortably, and low enough to keep splashing down. As a guide, many installers place the end of the spout around 10 to 15cm above the rim of a countertop basin, and add a little more for a deep bowl. Check the basin height and your vanity height together: a countertop basin on a standard vanity can sit higher than you expect.

Styles and finishes

Planning and fitting

  • Plan before tiling: the mixer body and pipes are built into the wall, so the tap position must be fixed before the wall is boarded and tiled.
  • Stud walls: add a timber support (noggin) behind the tap so the body is fixed firmly.
  • Choose the basin first: the basin and vanity decide the tap height and reach, so pick them together.
  • Access: fit isolation valves where you can reach them, for future servicing.

Basins that suit a wall mounted tap

Countertop basins with no tap hole are the obvious match: see our countertop basins, including textured designs in our fluted and textured bathrooms guide. Wall mounted taps also suit a console basin or washstand without tap holes.

Prices include VAT and were correct at the time of writing. Check the product page for the current price.

Shop this guide

Add to your basket here, or choose a finish or size without leaving the page.

Frequently asked questions

Are wall mounted basin taps a good idea?

Yes, especially with a countertop basin. They keep the worktop clear and are easy to clean around. They do need planning before the wall is tiled.

How far should a wall mounted tap stick out?

The spout should reach to the basin waste or just short of it. Measure from the finished wall to the centre of the waste and choose a reach to match.

How high should a wall mounted basin tap be?

As a guide, around 10 to 15cm above the basin rim, so there is room for your hands without too much splashing.

Can you fit a wall mounted tap on a stud wall?

Yes. Add a timber support behind the tap so the concealed body is held firmly, and plan it before the wall is boarded.

Do wall mounted basin taps need high water pressure?

Most of our JTP wall mounted mixers work from 0.5 bar. Some, such as JTP Amore, need 1 bar. Check the product page.

Plan your basin and tap

We can help you match the basin, vanity and tap so the reach and height are right first time. Visit our showroom at 32 Manor Park Rd, Birmingham B36 0DJ (Tuesday to Saturday, 9am to 5pm), call 0121 794 2553 or book your free consultation online. Every project starts with a free one-to-one consultation and a clear, itemised quote.