How to Choose Bathroom Taps: The Complete Guide

Brushed brass mono basin mixer on a white basin set into a light oak vanity unit, with a brass towel ring and mirror in a limestone-tiled bathroom

TL;DR: To choose bathroom taps, start with what they are going on: count the tap holes in your basin or bath (or decide to wall mount them), check the tap suits your water pressure, then pick a finish that matches your shower and accessories. A mono mixer suits most modern basins, a bath shower mixer adds a handset over the bath, and a tall mixer is needed for a countertop basin.

Taps are small, but you use them more than anything else in the bathroom, and the finish you pick sets the look for the shower, the accessories and often the mirror too. The good news is that the choice comes down to a few simple questions.

Here is how we would talk you through it in the showroom, with links to our more detailed guides along the way.

Start with the tap holes

Look at the basin or bath before you look at taps. The number of tap holes decides what will fit.

Tap holes What fits Typical use
1 hole A mono mixer: one body that mixes hot and cold Most modern basins and many baths
2 holes A pair of pillar taps, one hot and one cold Traditional basins and baths
3 holes A 3-hole mixer: two handles and a separate spout Period-style basins and deck-mounted bath fillers
No holes Wall mounted taps, or a tall mixer beside the basin Countertop basins and freestanding baths

If you are buying the basin and taps together, you can choose either way round. If you are keeping an existing basin, match the taps to its holes.

Basin taps

A mono basin mixer is the most common choice: one tap, one hole, easy to use and easy to clean. Pillar taps give a traditional look and suit period bathrooms. A 3-hole basin mixer has separate hot and cold handles with a spout in the middle, which looks lovely on a Victorian or Edwardian style basin. Our basin taps and mixers start at £38.

If you are choosing a countertop basin, the basin sits on top of the unit, so a standard mixer is usually too short to reach over the rim. You need a tall basin mixer, from £129, or a wall mounted tap. Our guide do countertop basins need an overflow? explains tap heights and wastes in more detail.

Wall mounted taps

Wall mounted taps free up the basin or bath edge and make cleaning easier. They are a lovely look, but they need planning: the valve sits inside the wall, so the position has to be fixed before the wall is tiled, and the spout has to reach far enough over the basin. Our wall mounted basin taps start at £139 and our wall mounted bath taps start at £69. Our wall mounted basin taps guide covers spout reach and height.

Bath taps

For a built-in bath, the choice is usually between:

  • Pillar bath taps, a simple pair for a traditional bath.
  • A bath filler, a single mixer that just fills the bath.
  • A bath shower mixer, which fills the bath and has a handheld shower on a hose, handy for rinsing hair or cleaning the bath.

Our bath taps and bath shower mixers start at £44, and bath shower mixers on their own start at £74.50. If you want a proper shower over the bath with a screen, see our complete guide to choosing a shower.

For a freestanding bath, the taps often stand on the floor beside it or come out of the wall. Floor standing bath shower mixers make a real centrepiece, and our freestanding bath taps start at £432. Our freestanding bath taps guide explains the options, and our complete guide to choosing a bath covers the bath itself.

Traditional or modern?

Traditional taps have cross heads or levers, curved spouts and often a ceramic indice that says hot or cold. They suit roll top baths, period basins and high level toilets. Our traditional bathroom taps start at £59, and our guide to JTP Grosvenor taps explains cross, lever and pinch handles. For the wider look, see our traditional bathroom ideas.

Modern taps are cleaner and simpler, usually with a single lever. Square or round bodies are mostly a matter of taste, but it looks best when the shape echoes the basin.

Check your water pressure

Most modern mixers are designed for combi boilers and unvented hot water systems, which give good pressure. If your home has a gravity-fed system, with a cold water tank in the loft, the pressure can be much lower. Check the minimum working pressure on the product page, or ask us, before you order. It is the one thing that can make a beautiful tap disappointing to use.

Don't forget the waste

The waste is the plug and the fitting under it. Most basin mixers either come with a waste or need one buying separately, so check the product page. A slotted waste is for a basin with an overflow; an unslotted waste is for one without. Our click clack basin wastes start at £31.50.

Choose and match a finish

The finish is where taps tie the whole room together. Pick one and run it through the taps, shower, accessories and, ideally, the mirror frame.

Our tap finishes explained guide compares how each one looks and wears, and our tap finish trends for 2027 shows where things are heading. For ideas on carrying one finish through the room, see our guides to brushed brass bathrooms, black bathroom accessories, black showers and matching bathroom accessories sets.

Looking after them

Wipe taps dry after use and clean them with warm soapy water and a soft cloth. Avoid abrasive pads and harsh descalers, especially on brushed, black and coloured finishes, and check the care notes for your tap.

Prices include VAT and were correct at the time of writing. Check the product page for the current price.

Shop this guide

Add to your basket here, or choose a finish or size without leaving the page.

Frequently asked questions

What is the difference between a mono mixer and pillar taps?

A mono mixer is one tap that mixes hot and cold and needs one tap hole. Pillar taps are a separate hot and cold pair that need two holes.

Do countertop basins need special taps?

Yes, usually. The basin sits on top of the unit, so you need a tall basin mixer or a wall mounted tap that can reach over the rim.

Can I put any tap on a low pressure system?

No. Check the minimum working pressure on the product page before you buy if you have a gravity-fed system with a tank in the loft.

Should all the metal in a bathroom match?

It looks most considered when it does, so we suggest one finish across the taps, shower, accessories and mirror frame. Mixing two finishes can work, but keep it deliberate.

See them in person

Finishes look different in real light, so come and compare our taps side by side. Visit our showroom at 32 Manor Park Rd, Birmingham B36 0DJ (Tuesday to Saturday, 9am to 5pm), call 0121 794 2553 or book your free consultation online. Every project starts with a free one-to-one consultation and a clear, itemised quote.