Freestanding Bath Taps: Floor Standing Fillers and Shower Mixers

Floor standing freestanding bath shower mixer in brushed brass beside a white freestanding bath

TL;DR: A freestanding bath tap stands on the floor beside the bath, with the spout reaching over the rim, so it suits freestanding baths that have no tap holes. Choose a bath filler if you only need to fill the bath, or a bath shower mixer if you also want a hand shower for rinsing.

  • Bath filler: spout only. Bath shower mixer: spout plus a hand shower on a cradle.
  • Our freestanding bath taps start at £432, with JTP models from £715.
  • Check the spout height and reach against your bath's rim height and shape.
  • The pipes come up through the floor, so plan them before the floor is finished.
  • Check the water pressure: some floor standing mixers need 1 bar.

A freestanding bath tap, also called a floor standing bath tap, stands on its own on the floor next to the bath, with the spout curving over the rim. It is the usual choice for a freestanding bath with no tap holes, and it becomes a feature in its own right.

We have just added freestanding bath taps from JTP in traditional and modern styles, alongside our own Tilelyte Brassware Collection. Here is how to choose.

Bath filler or bath shower mixer?

Bath filler Bath shower mixer
What it does Fills the bath through the spout Fills the bath and has a hand shower on a cradle
Best for Relaxing baths, a minimal look Rinsing hair, cleaning the bath, bathing children
Example JTP Grosvenor Cross filler, £715 to £880 Grosvenor Cross shower mixer, £890 to £1,040

Most people choose a bath shower mixer, because the hand shower is so useful. A bath filler suits a second bathroom or a room with a separate shower.

Traditional freestanding bath taps

They suit a roll top or slipper bath. See our JTP Grosvenor guide to compare the handle styles.

Modern freestanding bath taps

  • JTP VOS floor standing bath shower mixer (£840 to £1,080): 820mm tall, 250mm reach, in chrome, matt black, brushed brass, brushed bronze or brushed black.
  • JTP Amore side lever (£990): soft, rounded shape, 950mm tall with a 206mm reach.
  • JTP INOX (£1,080): grade 304 stainless steel, 1022mm tall with a 250mm reach.
  • Purita (£432), Florin (£439) and Koda (£449): good-value chrome options.
  • Fumo matt black (£599), Aurea brushed brass (£514) and Artisa (£614 to £890), in black and warm metal finishes.
  • Kelso (£649 to £699): slim and modern, in chrome, brushed brass, matt black or brushed nickel.
  • Grova (£738 to £862): a round, minimal body and gently curved spout, in chrome, matt black or brushed brass.

See all freestanding bath taps.

Height and spout reach

The spout needs to clear the rim and reach far enough over it to fill the bath without splashing the floor:

  • Height: compare the tap height on the product page with your bath's rim height. Slipper and roll top baths have a high end, so stand the tap at the lower side or the middle.
  • Reach: spout reach (projection) on our JTP taps ranges from 162mm to 250mm. A deep roll top rim needs more reach than a slim modern rim.
  • Position: most freestanding taps sit at the side of a double-ended bath, near the middle, or at the tap end of a single-ended bath.

Fitting a freestanding bath tap

The hot and cold pipes come up through the floor into the base of the tap, so they need to be run before the floor is finished:

  • Timber floors: pipes are run between the joists, and the tap base is fixed through to a solid support beneath.
  • Concrete floors: the pipes are chased into the screed, which is more work, so plan it early.
  • Access: some taps include a fixing or isolation kit; check what is included on the product page.

If floor pipes are not practical, a wall mounted bath filler on the nearest wall is a good alternative, such as the Grosvenor Cross wall mounted filler (£400 to £490).

Water pressure

Freestanding bath taps need enough pressure to lift the water up the stand. The JTP Grosvenor taps work from 0.5 bar, while the VOS and INOX floor standing mixers need 1 bar, which suits a combi boiler or unvented cylinder. Check the minimum pressure on each product page, and ask us if you are not sure what you have.

Choosing the bath

A freestanding tap needs a freestanding bath without tap holes. See our freestanding baths and guides to acrylic freestanding baths and cast iron baths.

Prices include VAT and were correct at the time of writing. Check the product page for the current price.

Shop this guide

Add to your basket here, or choose a finish or size without leaving the page.

Frequently asked questions

Do freestanding baths need freestanding taps?

Most freestanding baths have no tap holes, so they need a floor standing tap or a wall mounted filler. Some have tap holes in the rim for deck mounted taps.

How high should a freestanding bath tap be?

High enough for the spout to clear the bath rim. Our JTP floor standing taps range from 820mm to 1140mm tall, so compare the height with your bath.

Can you fit a freestanding bath tap on a concrete floor?

Yes, but the pipes have to be chased into the floor, so it is best planned before the floor is finished.

What is the difference between a bath filler and a bath shower mixer?

A bath filler only has a spout. A bath shower mixer adds a hand shower on a cradle for rinsing and cleaning.

Plan your bath and taps together

We will help you match the tap to the bath, the floor and your water system. Visit our showroom at 32 Manor Park Rd, Birmingham B36 0DJ (Tuesday to Saturday, 9am to 5pm), call 0121 794 2553 or book your free consultation online. Every project starts with a free one-to-one consultation and a clear, itemised quote.