Are Waterproof Vanity Units Worth It? PVC vs MDF Bathroom Furniture

White gloss floor standing vanity unit with water splashes in a bright family bathroom

TL;DR: Yes, for a damp bathroom. A waterproof vanity unit has a PVC carcass that will not swell, warp or delaminate when it gets wet, so it is worth it for family bathrooms, en suites with poor ventilation, wet rooms and rentals. In a well-ventilated bathroom where spills are wiped up, good moisture-resistant board furniture also lasts well.

  • Most bathroom furniture is made from moisture-resistant chipboard (MFC) or MDF with a sealed finish. It copes with steam, but water that gets into a chipped edge or the base can make it swell.
  • Waterproof furniture like our Atlas range is made from high-density PVC, so standing water and splashes do it no harm.
  • Atlas costs about the same as a standard unit: the 500mm vanity unit is £410 and the 600mm is £431, with a 5-year guarantee.
  • The trade-off is choice: waterproof ranges come in fewer finishes. Atlas is white gloss only.
  • Wall hung units, a good extractor fan and sealed edges help any vanity unit last longer.

Yes, waterproof vanity units are worth it if your bathroom gets wet or stays damp. They are made from PVC rather than chipboard or MDF, so water can't soak in and make the carcass swell, warp or peel. That matters most in family bathrooms, small en suites without a window, wet rooms and rented homes, where furniture gets the most splashes and the least drying time.

Here is how waterproof furniture compares with standard bathroom furniture, where it makes the biggest difference and when you don't need it.

Waterproof vs standard bathroom furniture

Waterproof (PVC) Moisture-resistant MFC or MDF Solid wood
Standing water Unaffected Can swell if water gets into a cut edge or chip Can mark, swell or split if not kept sealed
Steam and condensation Unaffected Fine in a ventilated room Needs good ventilation and an oiled or lacquered finish
Choice of finishes Limited Very wide Natural timber tones
Repairs Wipe clean, hard to damage Chips and swollen edges are hard to repair Can be sanded and refinished
Best for Family bathrooms, en suites, rentals, wet rooms Most bathrooms with an extractor fan Statement pieces in well-ventilated rooms

Why standard vanity units fail

Most bathroom furniture is made from moisture-resistant board, with a laminate, foil or lacquer finish on top. The finish keeps water out, and in a well-ventilated room it lasts for years. Problems start where water gets past the finish:

  • at the bottom edge of a floor standing unit, where water from the floor or a leaking waste sits against it;
  • around the basin cut-out and the pipe holes in the back panel;
  • at a chipped door edge or a scratched corner;
  • inside the cupboard if a waste or tap connection drips unnoticed.

Once board gets wet it swells, and the swelling doesn't go back down. That is why the bottom of an old vanity unit is so often the first thing to go.

What makes a vanity unit waterproof?

A waterproof unit is built from a material that doesn't absorb water. Our Atlas furniture is made from high-density PVC throughout the carcass, so it will not swell, warp or delaminate even if water sits on it, with soft close doors, a white gloss finish, a ceramic basin and a 5-year guarantee. Don't confuse it with "moisture-resistant" furniture, which is standard board with a better seal: it handles steam well, but it is not designed to get wet.

Our Atlas waterproof bathroom furniture

Item Size (H x W x D) Price
Atlas 500mm vanity unit and basin 850 x 510 x 395mm £410
Atlas 600mm vanity unit and basin 850 x 610 x 465mm £431
Atlas 500mm WC unit 830 x 495 x 248mm £189
Atlas wall mounted tall unit 1200 x 300 x 265mm £305
Atlas 1100mm L-shaped pack 865 x 1100 x 460mm £766.50
Atlas bath panels 1600, 1700 or 1800mm front; 700 or 800mm end £60 to £152

For comparison, our UK-made Rowan and Hoxton 500mm floor standing vanity units are £449, so choosing waterproof furniture doesn't mean paying more. The L-shaped pack includes the basin unit, WC unit, worktop and concealed cistern; read our guide to left and right hand L-shaped units before you order.

When a waterproof vanity unit is worth it

  • Family bathrooms: splashing at bath time, wet towels and wet floors.
  • En suites and cloakrooms with no window, where steam lingers.
  • Wet rooms and walk-in showers, where the floor regularly gets wet near the furniture.
  • Rentals and holiday lets, where furniture needs to survive with little care.
  • Replacing a unit that has already swollen, because the conditions that ruined it are likely still there.

When you don't need one

If your bathroom has a window or a good extractor fan, spills are wiped up and the unit sits clear of the shower, a quality moisture-resistant unit will last well, and you get a much wider choice of colours and styles: see our vanity units, including wooden-effect, green and black finishes.

How to make any vanity unit last longer

  • Choose wall hung if your floor gets wet. A wall hung vanity unit never sits in water and is easier to clean under.
  • Run the extractor fan during and for 15 to 20 minutes after a bath or shower. Our guide to stopping condensation and mould has more tips.
  • Seal the basin to the unit and any cut edges and pipe holes during fitting.
  • Check under the basin now and then for drips from the waste or tap connections.
  • Wipe up standing water on the worktop and around the base.

Prices include VAT and were correct at the time of writing. Check the product page for the current price.

Shop this guide

Add to your basket here, or choose a finish or size without leaving the page.

Frequently asked questions

Are waterproof vanity units worth it?

Yes, if your bathroom is damp, busy or poorly ventilated, or the floor often gets wet. A PVC unit won't swell or peel, and our Atlas range costs about the same as a standard unit.

What is a waterproof vanity unit made of?

Usually high-density PVC, which doesn't absorb water. Our Atlas units have a PVC carcass with a white gloss finish and a ceramic basin.

Is MDF OK for a bathroom vanity unit?

Moisture-resistant MDF or MFC with a sealed finish is fine in a ventilated bathroom. It can swell if water gets into a chipped edge or the base.

Is moisture-resistant the same as waterproof?

No. Moisture-resistant board copes with steam but can still swell if it gets wet. Waterproof PVC furniture is unaffected by water.

Do waterproof vanity units come in colours?

Choice is more limited than standard furniture. Our Atlas range is white gloss, with a matching WC unit, tall unit, L-shaped pack and bath panels.

Choose furniture that lasts

We can help you pick furniture to suit how your bathroom is used, and plan ventilation so it stays looking good. Visit our showroom at 32 Manor Park Rd, Birmingham B36 0DJ (Tuesday to Saturday, 9am to 5pm), call 0121 794 2553 or book your free consultation online. Every project starts with a free one-to-one consultation and a clear, itemised quote.